
Shop Now
Brand | TP-Link |
---|---|
Model | EAP225-Wall |
Product Dimensions | 1.42 x 0.86 x 0.2 cm; 181.44 Grams |
Item model number | EAP225-Wall |
Hardware Interface | Ethernet |
Batteries Included | No |
Batteries Required | No |
Data Transfer Rate | 1200 Megabits Per Second |
Wireless Type | 802.11b, 802.11a, 802.11ac |
Number of Ports | 1 |
Connector Type | Wi-fi |
Item Weight | 181 g |
HARDWARE FEATURES | |
---|---|
Interface | 1 × 10/100Mbps Ethernet uplink port accepts 802.3af/at power supply as PoE power device (PD) 2 × 10/100Mbps Ethernet Port 1 × 10/100Mbps with PoE pass-thru (requires 802.3at PoE+ power supply on PD port.) |
Physical Security Lock | Yes |
Button | Reset |
Power Supply | 802.3af or 802.3at PoE |
Power Consumption | 9 watts or 25.5 watts including PoE Out |
Dimensions | 5.6 × 3.4 × 0.8 in. (143 × 86 × 19.7mm) |
Antenna | 2 Dual-Band Antennas 2.4GHz: 2 × 3dBi 5GHz: 2 × 4dBi |
Mounting | Wall Plate Mounting |
WIRELESS FEATURES | |
---|---|
Wireless Standards | IEEE 802.11n/g/b/ac |
Frequency | 2.4GHz and 5GHz |
Signal Rate | • 5 GHz: Up to 867 Mbps • 2.4 GHz: Up to 300 Mbps |
Wireless Functions | 16 SSIDs(Up to 8 SSIDs on each band) Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) QoS(WMM) Load Balance Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client |
Wireless Security | Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Local LAN port based VLAN Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
Transmission Power | 21dBm max. (2.4 GHz) 21 dBm max. (5 GHz) |
MANAGEMENT | |
---|---|
Omada Cloud Access | Yes |
Omada App | Yes |
Omada Cloud Controller | Yes |
Centralized Management | • Omada Hardware Controller (OC300) • Omada Hardware Controller (OC200) • Omada Software Controller |
Omada Controller Software | Yes |
Cloud Access | Yes (Through OC300, OC200, or Omada Software Controller) |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | v1,v2c |
System Logging Local/Remote Syslog | Local/Remote Syslog |
SSH | Yes |
Web-based Management | HTTP/HTTPS |
L3 Management | Yes |
Multi-site Management | Yes |
Management VLAN | Yes |
An EAP in each room guarantees a strong wireless signal and allows guests to enjoy their own private Wi-Fi network.
With 802.3af/802.3at Power over Ethernet supported there’s no need to install additional wiring in the building. Simply plug in existing Ethernet cables and you’re ready to go.
Upgrade Ethernet wall jacks to high-performance Wi-Fi access points. The EAPs can be fitted to existing EU or US wall junction boxes, making installation quick and non-disruptive.
*Fit for flowing two kinds of wall junction
More than just a wireless access point, EAP225-Wall acts as a switch and provides three standard Ethernet jacks together with a Power over Ethernet outlet, capable of powering wired devices such as IP phones, IP cameras, intercoms and more.
The EAP225-Wall wireless access point blends into any business setting with a refined, minimalist appearance.
EAP225-Wall delivers combined dual-band speeds of up to 1200Mbps. Armed with the latest 802.11ac Wave 2 MU-MIMO technology, it can exchange data with multiple clients at the same time to allow more devices to connect without any slowdown to the network.
Omada offers cloud access to its centralized management platform. Take your network with you, wherever you go.
OTHERS | |
---|---|
Certification | FCC, RoHS |
Package Contents | AC1200 MU-MIMO Wall-Plate Access Point EAP225-Wall Installation Guide Mounting Screw |
Environment | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |